logo8.gif (1535 bytes)

WWW.OILPRESS.COM

 se.gif (95 bytes) Svensk:  Hem   Produkter   Skeppsta.Maskin AB     Raps som diesel   Video    Länkar    Återförsäljare  Adress  Sid struktur    

gb.gif (106 bytes) EnglishHome    Oilpress   Skeppsta.Maskin Ltd   Rape-ol for diesel fuel (SVO)   Burners   Video   Links   Retail dealers  Address  Site map
  Du behöver en Java kompitabel browser för att se denna applet... 

ADVANTAGES OF THE TÄBY PRESS TYPES 55, 70, 90 Standard
Direct drive, no belts or chains between the drive unit and the press part.
Helical gears in the gear box, of industrial quality.
Hardened press components, even those which are not wear parts, provide improved durability when dismantling.
Low cost for wear parts. The press tube is of simple design with no threads. fordel-pressror1-320.jpg (18569 bytes) 
The press screw can be repaired, which means low wear costs. It is case-hardened, not just hard chromium plated.


Exchange the presscrew is very easy look at : fordel-byte-skruv1-320.jpg (22433 bytes)  fordel-byte-skruv2-320.jpg (20410 bytes)

Reversible press tube, provides even wear and longer service-life.

For pressing big seeds. or very light seeds in m3. Animation  video

 

Press screw part 2002  low cost. you can change 180  angle and worn again  Animation Video

 

World Patent

 


 

See Oil press in works realtime in Finland
5 units Type 90-2 Double  Double  run night and day,  months after months . Over  33 000 hours á oil press running.  http://rypsipuristamo.no-ip.org/


The press tube is prepared for oxygen-free oil pressing. There is an O-ring groove in the press tube. Look att
fordel-pressror-syrefri1-320.jpg (28448 bytes)  

SIS 2172 in presstube    C     Max    0.20%

                                    Si     Max    0.55%

                                    Mn   Max    1.60%

                                    P     Max    0.045%

                                    S     Max    0.045%

 

SIS 2511  in presscrew  C     0.13 - 0.18%

                                    Si     0.15 - 0.40%

                                    Mn   0.70 - 1.10%

                                    P     Max    0.035%

                                    S     Max    0.050%

                                    Cr    0.60 - 1.00%

                                    Ni    0.80 - 1.20%

                                    Mo     Max    0.10%

Press tubes are inexpensive. Therefore several press tubes can be kept in stock for different types of seed.
Exchangeable nozzles. Simple design, no threads. Low price. Seed cakes of the pellet type.
No threads in the press tube which could otherwise become clogged up with dried linseed oil and leftover seeds,
making the press tube difficult to dismantle. Having no threads also means it is easier to assemble without having
to worry about seeds getting caught in threads.
Transparent inlet pipe provides the best view. A sensor can be mounted in the inlet pipe to the hopper.

A Watch  Guard guard.JPG (33050 bytes) can mount on the oil-press.
The bearing housing has standard bearings which means low cost ball bearings.
Both slits and hole for the oil in press-tube less risk for stop.'
Big slits in press-house, less risk for rotation and wears. fordel-presshus1-320.jpg (28026 bytes)
Overload protection is provided by means of torque limit.
The variator is by means of a static frequency changer, which means no mechanical wear, etc.
Soft start, the rotation speed rises to the motor on-speed gradually without jerking.
A toothed coupling between the gears and the oil press provides a soft power transition.
Reversing option, useful when you want to dismantle the press head, etc., and if a foreign object becomes lodged in the unit.
A display shows amps, rotation speed, volts and Hz.
Fault location capability via the display, the four most recent faults triggered are stored.
Overheating protection 140 oC on the press head. Low current, 24 volts, in the cable, for safety purposes.
A heating collar with a thermostat provides good starting up without the need to change nozzles or to heat by using an external heat source, for safety reasons etc.
Heat is provided via the heated collar; useful for pressing very cold seed in the winter.
The robust electrical cabinet complies with CE and EMC norms.
Screened electrical cables. The sheet steel cabinet protects the electrical components. A sighting glass allows inspection without opening a cover.
There is room for an instruction book etc. in the electrical cabinet.
There is an earth fault contact breaker in the electrical cabinet for safety purposes.
There are fuses in the electrical cabinet. elskop55fri3.JPG (49524 bytes) elskop-55-doorfri.JPG (21557 bytes)
The press is divided into three parts: the electrical cabinet, a pressing unit and the motor gear unit. This facilitates servicing.
Standard components, manufactured in the West, are easy to service and can be obtained quickly.
The oil presses are not heavy. Type 55 weighs 62 kg. Their small size means that the press is easy to position

   Hälsningar från Bengt

  Skeppsta Maskin AB
Bengt Jonsson
Täby Skeppsta
S-705 94 ÖREBRO
SWEDEN
Tel: +46-19 22 80 05 Fax: +46-19 22 80 05
  Start site
type20o.JPG (3993 bytes)